How I Achieved Maximum Success with

The Importance of Colors of Underground Utility Lines

If you find underground utilities, you can easily determine what type of utility it is for. Before, it was difficult to do so and people were at risk if they try to make a dig without being able to identify all the lines underneath the land. There is reduced risks today because of new methods of identifying utility lines although not a complete reduction. If there is a need to dig the ground, it is very important that the utility lines first be identified. The OSHA requires that utilities underground first be located before digging through a piece of land. It is to prevent disaster. Fatal injuries can happen if underground utility lines are struck. The location of the areas where the lines were struck can experience service interruption. Before digging their property, people should call 811 to call the utility companies so that these incidents are prevented. Calling the 811 number will enable utility companies to come out and mark their respective utility lines.

Marking lines may lessen the risks but there are time when accidents still happen. Utility lines are struck every 6 minutes, some place. Traffic lights, wastewater pipes, telecommunication lines, etc. are affected when lines are struck. This is then something that affects public health and safety.

Companies can locate utility lines through the use of GPR or Ground Penetrating Radar. With this machine, companies can easily locate utility lines. However, for the ordinary homeowner, it is enough to simply call 811 to be able to let companies located their lines.

Today, utility lines are marked with different colors for easy identification. Here are the colors used for different utilities.

White lines are for proposed excavation sites. Area that will be excavated in the future are marked.

Pink lines are temporary survey markings. Legal property boundaries are marked off by these pink lines.

Electric power lines, cable, conduit, and lighting cable use red lines. This color is appropriate for electrical works since it is associated with fire and danger.

If you see yellow lines, then they are lines for gas, oil, steam, petroleum, and gaseous materials. Bright yellow is an appropriate warning color since it is very disastrous to have a natural gas leak.

Communication, alarm, signal lines, cable, or conduit use orange lines. If you see blue lines then these are lines for potable water. Purple lines are used for reclaimed water, irrigation, and slurry lines. Sewer and drain lines use the color green. Hitting this line can truly derail any project for a long period of time.

If you want to learn more about utility lines click here now! Click here for more.